TS Series ii
Analog Control - A Series
TS Series models utilizing the A Version front panel, TSA, provide stepless analog control from front panel potentiometers. With simple configuration changes, voltage, current, over voltage trip, and over current trip may be programmed from the rear connector or with RS232, optional IEEE-488, or optional Ethernet communications. TSA Series power supplies are well suited for industrial applications requiring a minimum of control.
Digital Control - D Series
TS Series models utilizing the D Version front panel, TSD, provide all of the features of the A
Version plus these models can be configured for keypad entries and up/down presses for voltage,
current, over voltage trip, and over current trip. Key strokes are kept to a minimum by a repeat
last command feature. TSD Series power supplies are well suited for laboratory applications
requiring enhanced control.
TSD Series models have one-hundred memory states available to program voltage, current, over
voltage trip, over current trip, and time period. Set points can be auto sequenced with time or
external triggering. Special programming codes allow repeating to create a power function
generator. The first 10 memory states are displayed on the front panel to simplify programming
tasks.
TSD Series power supplies offer an analog input to modulate the voltage or current setting using
piecewise linear approximation. This feature enables the voltage or current setting to be adjusted
by a sensor input, such as a thermistor, or by monitoring its own voltage or current. Modulation
allows the output to be tailored for advanced process control applications, battery charging, and
source emulation.
Computer Control - C Series
TS SERIES models utilizing the C Version front panel, TSC, only allow control from the rear connector or by RS232, optional IEEE-488, or optional Ethernet communications. These models are intended for process control applications where front panel controls and displays are not required or desired.
Features Comparison
| Features | TSC | TSA | TSD |
|---|---|---|---|
| FRONT PANEL CONTROLS | |||
| Power on/off | • | • | • |
| Start/Stop | • | • | |
| Rotary Voltage/Current Entry | • | • | |
| Rotary OVT/OCT Entry | • | • | |
| Menu/Item | • | • | |
| Display Settings | • | • | |
| Enter/Clear | • | • | |
| Keypad Voltage/Current Entry | • | ||
| Keypad OVT/OCT Entry | • | ||
| Arm | • | ||
| INDICATORS | |||
| Voltage/Current Set Point | • | • | |
| OVT/OCT Set Point | • | • | |
| Voltage/Current Output | • | • | |
| Internal/External Control | • | • | |
| Alarms | • | • | |
| Rotary/External/Remote Programming | • | • | |
| Remote Sense Enabled | • | • | |
| Keypad Programming | • | ||
| Memory Setting | • | ||
| Armed for Auto Sequence Operation | • | ||
| REAR PANEL CONTROLS | |||
| Voltage/Current Set Point | • | • | • |
| OVT/OCT Set Point | • | • | • |
| Modulation Set Point | • | ||
| Voltage/Current Output | • | • | • |
| Internal/External Control | • | • | • |
| Alarm Output (9 lines) | • | • | • |
| Status Output (6 lines) | • | • | • |
| Master/Slave Connections | • | • | • |
| Remote Sense Inputs | • | • | • |
| RS232 Inputs | • | • | • |
| Interlock Enable | • | • | • |
| Arm Enable | • |